Hushmat Complete Year, Make and Model Vehicle Insulation kit covers 100 percent of the area of your vehicles firewall, floor, doors, roof and trunk. HushMat has determined the exact amount of material required for your vehicle.
The Porsche 911, the two door, high performance classic that every car builder attempts to match and most fall short. The rear mounted powerplant, aerodynamic body and low to the road design create noise and heat in the interior making even a short drive uncomfortable. It is nearly impossible to hold a phone conversation while on the road in the 911. While the 911 has undergone numerous development modifications over the years, the noise and heat problem in the vehicle remains, until HushMat came along. HushMat?s light weight sound deadening and thermal insulation material is designed to bond to the floor pan, firewall, tunnel, doors, roof and also the forward trunk. HushMat?s self-adhesive material forms and molds to the uneven sheet metal insulates 100 percent of the vehicle. HushMat has done the extensive work to measure and package pre-sized kits for your 911. HushMat trims easily with household scissors or a box knife. If you have modified any section of the original sheet metal Hushmat can be easily trimmed to fit. HushMat is available in either Stealth Black foil or Silver Aluminum foil. Both work and perform exactly the same.
- Eliminates Road Noise and Vibration
- Reduces Heat Up To 40 Percent
- Automotive OEM Specified and Approved
- HushMat Ultra Requires No Pre-cleaning Of The Application Surface
- No More Acetone Or Alcohol Surface Preparation
- HushMat Ultra Requires No Heat Guns Or Messy Glue To Apply
- One-Step Application With HushMat Ultra-Simply Peel and Stick
- Proven To Perform From -30 F To 550 F
- Manufactured in the USA for Over 25 years
Information:
Reduce that aftermarket engine, exhaust drone, road noise, vibration and the noise that disrupts your ride and reduce the heat that comes from engine, headers, exhaust and catalytic converter with one USA Made material light weight HushMat Ultra
Application Summary:
| Year |
Make/Model |
| 1974-1977 |
Porsche 911 |
| Attributes |
| California Proposition 65 |
No |
| Cold Flexibility |
Can be bent around 25 mm. mandrel at -30 degrees C with no cracking or loss of adhesion |
| Color |
Polymer - Black; Backing - Silver |
| Country of Origin (Primary) |
US |
| Emission Code |
Legal US |
| Flammability |
Tested per FMVSS 302, HushMat Ultra is self-extinguishing and meets all aspects of the standard |
| Hardness |
6.5 - 9.0mm ?ASTM D-5 |
| Harmonized Tariff Code (Schedule B) |
4008210000 |
| Hazardous Material Code |
N |
| Life Cycle Status Code |
Available to Order |
| NAFTA Preference Criterion Code |
C |
| Peel Strength |
Tested in 90 degree peel at a crosshead speed of 300mm per minute on a 25 mm wide test specimen. Average load in Newtons is reported. |
| R-Value |
7 |
| Safety |
HushMat Ultra is not considered a hazardous material. Care should be used in handling to avoid cuts from the foil. Gloves are recommended. The Material Safety Data Sheet is available upon request and should be read and understood before using this product. |
| SDR Required Flag |
N |
| SDS Sheet Number |
NA |
| Shelf Life |
At least 6 months when stored at 40 degrees C or less |
| Specific Gravity |
1.47 (approx. 0.47 pounds per square foot) |
| Temperature Resistance |
HUSHMAT ULTRA will withstand a bake of 1 hour at 240 degrees C with no deformation, sag, or flow when baked in horizontal, vertical or inverted positions. |
| Thickness |
1.5mm |
| GTIN |
00881101581502 |
